velda_itronic
velda_itronic

Electronic blanketweed devices

!
velda_itronic

Velda Itronic 15 blanketweed killer

For ponds up to 15000 litres or 3000 gallons

Velda introduces a revolutionary product which tackles the algae problem with lasting results. The core of the I-Tronic consists of an anode made of a copper alloy and a cathode of stainless steel. The operating unit, which is microprocessor controlled, generates electric pulses, as a result of which positively charged copper ions are released. Thus forming a natural killer of both fibrous and slimy algae. Results ae quite amazing, simply run at low levels for constant control or dose as necessary. Replacement copper anodes are very reasonable to buy and should last 1-2 years. Fits flexible pipe sizes up to 1.25"

velda_itronic

Velda Itronic 35 blanketweed killer

For ponds up to 35000 litres or 7,500 gallons

Velda introduces a revolutionary product which tackles the algae problem with lasting results. The core of the I-Tronic consists of an anode made of a copper alloy and a cathode of stainless steel. The operating unit, which is microprocessor controlled, generates electric pulses, as a result of which positively charged copper ions are released. Thus forming a natural killer of both fibrous and slimy algae. Results ae quite amazing, simply run at low levels for constant control or dose as necessary. Replacement copper anodes are very reasonable to buy and should last 1-2 years. Fits pipe sizes up to 1.5"

velda_itronic

Velda Itronic 75 blanketweed killer

For ponds up to 75000 litres or 16,500 gallons

Velda introduces a revolutionary product which tackles the algae problem with lasting results. The core of the I-Tronic consists of an anode made of a copper alloy and a cathode of stainless steel. The operating unit, which is microprocessor controlled, generates electric pulses, as a result of which positively charged copper ions are released. Thus forming a natural killer of both fibrous and slimy algae. Results ae quite amazing, simply run at low levels for constant control or dose as necessary. Replacement copper anodes are very reasonable to buy and should last 1-2 years. Fits pipe sizes up to 1.5"

velda_itronic_anode

Replacement Velda itronic copper anode 05 model

Ideally replace after every one or two years, simply remove stainless steel cathode by 'pulling off' and unscrew the anode to replace. Note always clean the stainless steel part thoroughly (you can leave in a kettle descaler compound to clean)
velda_itronic_anode

Replacement Velda itronic copper anode 15 model

Ideally replace after every one or two years, simply remove stainless steel cathode by 'pulling off' and unscrew the anode to replace. Note always clean the stainless steel part thoroughly (you can leave in a kettle descaler compound to clean)
velda_itronic_anode

Replacement Velda itronic copper anode 35 model

Ideally replace after every one or two years, simply remove stainless steel cathode by 'pulling off' and unscrew the anode to replace. Note always clean the stainless steel part thoroughly (you can leave in a kettle descaler compound to clean)
velda_itronic_anode

Replacement Velda itronic copper anode 75 model

Ideally replace after every one or two years, simply remove stainless steel cathode by 'pulling off' and unscrew the anode to replace. Note always clean the stainless steel part thoroughly (you can leave in a kettle descaler compound to clean)

Winter stop for velda itronic model 05/15

This allows you to remove the copper anode when not in use, normally in winter. Also saves wear on the copper anode. Simple to fit just screw in place of the anode.

Winter stop for velda itronic model 35/75

This allows you to remove the copper anode when not in use, normally in winter. Also saves wear on the copper anode. Simple to fit just screw in place of the anode.
itronic cathode

Velda itronic stainless steel cathode for 05 model

Original stainless steel replacement for itronic 05 model. Simple to fit just pull off the old and replace with new.